Hard Surface Cleaner

Description

• Quartz Worktops 

  Polished Granite 

  Polished Marble 

  UPVC 

  Stainless Steel 

  Glass (lowers static and therefore dirt adhesion) 

  Painted Surfaces 

  Wood Surfaces 

  Brass, Copper, Zinc & Aluminium 

  This hard surface cleaner is non-caustic and is suitable for horizontal and vertical surfaces both internally and externally. 

  Ideal for worktops and associated surfaces that are exposed to high and regular use enables easy cleaning of soiling oils and grease. Suitable for vertical and horizontal surfaces: Worktops and Floors.

• Non-caustic

  Clear, colourless liquid

  pH = 7

  Density: 1.0

• ‘Always test apply on a small hidden portion of the substrate’ Spray an even, light application to a clean and dry surface, from a distance of 10-15cm. Leave for 30-40 seconds Remove excess by wiping with a dry, soft cloth. Within minutes, buff the whole treated surface using a fresh dry, clean soft cloth

• The figures below are approximate and should be used only as a general guideline:
  5-10 m² / 500 ml.

• Immediately after you have finished, clean all tools and equipment with water.

• Keep in a dry place (between 5°C and 30°C).
  Storage: 24 months following the production date when kept in the original unopened container.

  RECOMMENDATIONS
  Do not use below 4°C. Avoid use in rainy conditions.

• Hard Surface Cleaner Data Sheet