Suitable in any environment. Internally this Polished Granite Protector will protect against water and moisture penetration, food and drink staining. Externally against bird fouling and vegetation, algae, lichen and moss growth.
Fast-drying means that the surface is sealed within 2 hours but optimum performance is achieved after 2-3 days.
This is a non-hazardous, waterborne polished granite sealer that is solvent and silicone-free. Fully biodegradable and invisible once dry.
Coverage is 8-16 sqm per litre and has a 15-year guarantee.
See Data Sheet for full application details and properties.
Water and moisture penetration
Food and drink staining
Mild Acids and Alkali cleaners
Pollution & dirt contamination
Vegetation, Algae, Lichen & Moss growth
A treated surface will remain moisture vapour permeable.
Invisible once dry
Vapour permeable (Sd value: 0.03)
Non-hazardous water borne product
Solvent and silicone-free
Odour: Slight, soapy
Density: 1.0kgs/Ltr @ 25°C.
Consistency: Low viscosity liquid
Chemical resistance: Dilute acids & alkalis,
de-icing salts, water
‘Always test apply on a small hidden portion of the substrate’
Substrate Quality: Cracks must be repaired using a repair system.
Moisture content should be = or <5% to a depth of 1cm.
substrate Preparation: Clean, free from dust, dirt, oil, efflorescence, organic growth and old paint films.
After applying to surface immediately buff it dry with a soft clean cloth. Water repellence is evident after initial curing but may take up to 7 days to reach 100% efficiency
The product will not perform correctly if applied over non-absorbent surfaces.